MJX3525 數控木門四邊鋸
適用于木門大批量連線生產,木門四邊同時鋸切,復合門最快規方鋸切可在45秒內完成。
關鍵詞:
所屬分類:
木門加工設備
產品附件:

咨詢熱線:
MJX3525 數控木門四邊鋸
圖文詳情
主要用途Main Application
適用于木門大批量連線生產,木門四邊同時鋸切,復合門最快規方鋸切可在45秒內完成。
This machine is characterized by synchronous four side cross cutting that allows the process accomplish within 45 seconds.
主要特點Main Features
四個鋸組都設有主、副鋸配合工作,確保鋸切面不崩邊;
門扇加工采用居中鋸切加工方式,保證造型居中;
四邊同時鋸切,保證在40秒以內完成i ]扇鋸切規方工序;
本機的兩個縱邊鋸組,設置在木門]的下方鋸切,隨著木i厚度的變化,副鋸高度無需調節,縱邊居中鋸切, 兩個縱邊鋸組角度可傾斜調節0~ 5° ;
通過式縱向自動進出料,數控系統可根據連線需要增加自動掃碼功能;
工件加工時采用四角氣缸壓料。
規方鋸切同時長邊銑槽,長邊鋸組采用11Kw電主軸帶動銑刀加工子母門L型裁口。
The four saw sets are equipped with main and scoring saws working together ensures the clean cutting surfaces and edges.
The two vertical edge saw sets are setting under the workpiece.
As the thickness of the wooden door changes, the height of scoring saws does not need to be adjusted. The vertical edge is centered for sawing.
Two vertical edges saw group Angle may adjustthe0~5° ;
The longitudinal automatic feeding and unloading system can add the bar code scanning according to the needs of the automatic production line
Automatic lubrication system, parametric programming consists the user friendly HMI interface.
The 11Kw spindle drives the milling cutter to process the L shaped cut of the door.
技術參數Technical Parameters
加工長度 | 1800-2500mm |
加工寬度 | 300-1100mm |
加工厚度 | 30-85mm |
X軸最快走刀速度 | 25m/min |
Y軸最快走刀速度 | 25m/min |
主鋸鋸片直徑 | D350mm-d30mm |
副鋸鋸片直徑 | D120mm-d22mm |
主鋸功率 | 11Kwx2+7.5Kwx2 |
輔鋸功率 | 1.1Kwx4 |
電機總功率 | 69.9Kw |
壓縮空氣壓力 | 0.5~0.7MPa |
主機尺寸 | 5020*2800*1900mm |
工作臺高度 | 910mm |
機器重量 | 4500Kg |
上一頁
MDXZ628A 數控門鎖合頁加工中心
在線咨詢